 |
|
|
IP66 Polyurethane
Remote Scanner
RPU01GBX00 - External Polyurethane Scanner, IP66 tamper resistant
(115 mm x 115 mm). A robust, vandal proof unit able
to withstand extremely adverse conditions, it can
be totally submerged for long periods. This
unit is manufactured in accordance with a dust and
splash environment similar to that required for a
rating of IP66 .
RPU02GB - Spacer box for Polyurethane Scanner. This unit is manufactured in
accordance with a dust and splash environment similar
to that required for a rating of IP66.
|
|
|
Features:
- Able
to withstand being totally submerged for extended
periods, and harsh environments
-
Extremely
tough and durable, able to withstand excessive
physical abuse
-
Can
be mounted up to 25 m away from any unit.
-
3
LEDs to indicate:
Access Allowed - green
Present Tag - Yellow
Access Denied - red.
-
International signs to indicate status
-
Beeper
in tuning box
-
Spacer
Box - Optional extra component for use with the
polyurethane Remote Scanner. It has the following
benefits:
-
Fits underneath the polyurethane Remote Scanner
to improve the range when the scanner is mounted
on metal. The range improves when the scanner
is mounted slightly away from metal.
-
Provides a housing for the tuning box. The cable
from the tuning box to the Impro Reader may be
as long as 25 m.
Main Applications:
-
To
be fitted on to external walls where vandalism
is a potential threat.
-
Harsh
environment
-
Directly
on to metal
-
Inside
buildings, apartments, etc.
-
As
a remote scanner for Anti-Passback applications
-
As
an extended first channel scanner
-
In
cases where walls have high metal content or are
too thick
-
This
Remote scanner can be used with the following
products:
|
Flexi-Scan - all versions
|
Link-Scan Controller
|
|
Link-Scan Terminal
|
Imp-Scan
|
|
Gen-Scan
|
Multi-Scan IV Terminals.
|
Specifications:
- Coil
frequency : 281250 Hz or 125000 Hz
-
Reading range: Approximately 100 mm above the front of the reader
but depends on the type of tag used; card / ID
type tag reads slightly further than the button
type.
-
Positioning: The scanners can be positioned 500 mm apart or more
on most surfaces including metal which will produce
only slight reduction of reading range.
-
Status indicators Access Allowed Present Tag, Access Denied.
-
Scanner materials: Set in Polyurethane material which is waterproof
and tamper resistant.
-
Scanner Dimensions: L = 118 mm, W = 50 mm, H = 20 mm
-
Tuning box Dimensions: L = 72 mm, W = 50 mm, H = 26 mm
-
Operating Environment:
Temperature range : -25°C to + 70°C
Humidity range : 0-95% non condensing
|
|
