|
3-Channel Code-Hopping RF Transmitter
& Receiver from SECO-LARM® |
|
SK-916T3A
Three-Button CODEBUMP™ Anti-Codegrabbing RF Transmitter
Frequency 315 MHz.
Variable capacitance controlled.
Operates up to 200 feet (60 meters).
18 quintillion possible codes.
RF anti-scan protection.
Use with SK-916RSM3.
Includes 12VDC alkaline battery with handsome key chain ring.
Private label available.
Contact SECO-LARM for details.
|
|
Size: 2"
x 1.25" x .45"
(51 x 32 x 11 mm) |
SECO-LARM PATENTED CODEBUMP™
With SECO-LARM’s Patented Anti-CodeGrabbing
technology the transmitter’s code changes every time the transmitter
button is pressed. This prevents the electronic theft of the code. |
SK-916RSM3
Three-Channel CODEBUMP™ Code-Hopping RF Receiver
(Shunt/Momentary Operation)
Patented CODEBUMP™ anti-codegrabbing technology.
Uses SK-916T3A transmitter (up to 200 ft. range).
Tact switch for easy transmitter learning.
Easily Code-learns up to 5 remotes.
Stores codes safely in EEPROM for up to one year in case of
power loss.
Wire leads for easy connection.
One channel programmable for shunt or momentary operation, 2
channels are momentary operation.
Two built-in Form-C dry relay contact (N.O./N.C./Common) outputs,
max. 2 Amps. at 24VDC.
One LED for each channel to indicate when receiver receives
signal from transmitter.
Use to control the garage door, house lights, alarm control
panel, or other functions that require momentary or shunt operation.
CODEBUMP™ Technology
|
|
Size: 3.25" x 2.7" x 1.1" (83 x 68 x 27.5mm)
|
In addition, these revolutionary receivers have:
--1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF
signals.
--2.HIGHER SENSITIVITY for greater operating distances.
--3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver
is less affected by how and where mounted.
--4.GREATER TUNING STABILITY so the receiver's frequency remains
unaffected by shock and vibration.
|
Be prepared for today's thieves with SECO-LARM's patented
CODEBUMP technology. With CODEBUMP, so-called “code-grabbers” and
“scanners” are rendered obsolete because the RF code changes every time
the transmitter button is pressed. In addition, with over 18 quintillion
(1.8 x 1018) codes, the chances of ever repeating a code are
virtually non-existent. SECO-LARM's CODEBUMP transmitters
and receivers are perfect for controlling garage and gate openers, car
and home alarms, plus much more.
|
|
SPECIFICATIONS |
Operating Frequency:
|
315MHz |
Operating Voltage:
|
9.6 to 14.4VDC |
Operating Distance:
|
Up to 200 feet
(open air) |
Operating Temperature: |
-400C to 750C,
-400F to 1670F |
Current Drain:
|
8mA at 12VDC (standby) |
60mA at 12VDC (Channel 1
or 2, activated)
20mA at 12VDC (Channel 3, activated) |
Sensitivity: |
-87dBm (typical) |
Data Format: |
PWM |
RF Codes: |
18 quintillion |
RF Channels: |
Three |
Number of Stored Transmitter
Codes: |
5 |
Receiver Outputs: |
Two form “C” dry relay contacts
(N.O./N.C./Common); 2 Amps (Channel 1 or 2); 200mA TR GND
O/P (Channel 3) |
Receiver Output Modes: |
Channel 1: Momentary or shunt
Channel 2 or 3: Momentary |
Connectors: |
8 Pin wire harness and Channel
3 wire |
Case Construction: |
High-impact ABS plastic |
Size: |
3.25” x 2.7” x 1.1” (83 x
68 x 27.5mm) |
Weight: |
3.5 oz. (100gm.) |
|
OPERATION |
Mode switch (one per
channel): |
Enter Learn Mode: |
Press tact switch. |
Learn Transmitter Code: |
Within 15 seconds of
entering learn mode press button 1 and hold for 3 seconds. |
LED Indicator (one
per channel): |
Steady ON: |
Red - Channel 1
Green - Channel 2
Yellow - Channel 3
|
Once button 1 (channel
1) is learned, button 2 (channel 2), and button 3 (channel 3)
are also automatically learned. |
|
|