|
|
Apt. Intercom Lobby Panels/Pedestals
Modular Style Panel. Natural Anodized Aluminum finish with plastic
push buttons and plastic speaker grille. Polycarbonate Name holders
supplied along side buttons.
The AM190 series entrance panel is a modular style
panel, for use with most open-voice (loud-speaking type) apartment
intercom stations. AM190 panels are equipped with a weather-resistant
mylar cone speaker protected by a BLACK flame retardant polycarbonate
plastic speaker grille. AM190 series panels are available with
a variety of module and frame/housing configurations. Modules
beginning with the model AM190 are button modules only, with no
speaker. AM190 modules are available with 2 to 22 buttons. Modules
beginning with the model AM192 have a 45-ohm speaker and can have
up to 18 buttons. Along side each plastic push button is a nameholder,
made of BLACK flame retardant polycarbonate plastic with a transparent
flame retardant polycarbonate plastic cover. Names can easily
be inserted using paper tabs (supplied) or optional engraved plastic
nameplates (model #AMNP). AM190 and AM192 modules must be installed
into a flush or a surface panel frame. Flush panels require an
OF190 series frame, with the OH190 series flush housing. Surface
panels require anOF190S series surface frame only, and do not
require a back box.
|
AM190 Series (typical)
|
FEATURES
Our Lowest Cost Modular Panels
Hands-Free Loudspeaking
Weather-resistant Mylar Speaker
Self-Wiping Plastic Pushbuttons
Ultra Modern Styling
Flush and Surface Models Available
Modular Construction allows use in almost any size building
SPECIFICATIONS
Dimensions: |
Height: |
19.00" (483mm) |
|
Width: |
Depends upon number of modules wide. |
|
Depth: |
4.00" (102mm) (Flush Housings) |
|
Projects: |
2.25" (58mm) (Surface Mount Frames) |
Construction: |
Anodized extruded aluminum panel/faceplate.
|
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts. |
Speaker: |
2.50" (64mm) 45 ohm, mylar cone, Model #SK024.
|
Housings: |
OH190 series, for flush style OF190 frames only.
|
|
Apt. Intercom Lobby Panels/Pedestals
Vandal-Resistant Panel. Natural Anodized Aluminum finish with metal
pushbuttons and metal speaker grille. Polycarbonate Name holders
supplied alongside buttons.
The AM490 series Tek-Guard™ entrance panel is
a modular style panel, for use with most open-voice (loud-speaking
type) apartment intercom stations. AM490 panels are equipped with
a weather-resistant mylar cone speaker protected by a louvred
style aluminum speaker grille, and solid aluminum pushbutton plungers,
to resist vandalism. AM490 series panels are available with a
variety of module and frame/housing configurations. Modules beginning
with the model AM490 are button modules only, with no speaker.
AM490 modules are available with 2 to 22 buttons. Modules beginning
with the model AM492 have a 45-ohm speaker and can have up to
18 buttons. Along side each metal pushbutton is a nameholder,
made of BLACK flame retardant polycarbonate plastic with a transparent
flame retardant polycarbonate plastic cover. Names can easily
be inserted using paper tabs (supplied) oroptional engraved plastic
nameplates (model #AMNP). AM490 and AM492 modules must be installed
into a flush or a surface panel frame. Flush panels require an
OF190 series frame, with the OH190 series flush housing. Surface
panels require an OF190S series surface frame only, and do not
require a back box.
|
AM490 Series
|
FEATURES
Vandal-Resistant with Metal Buttons and Metal Speaker Grille
Hands-Free Loudspeaking
Weather-resistant Mylar Speaker
Self-Wiping Pushbuttons
Ultra Modern Styling
Flush and Surface Models Available
Modular Construction allows use in almost any size building
SPECIFICATIONS
Dimensions: |
Height: |
19.00" (483mm) |
|
Width: |
Depends upon number of modules wide. |
|
Depth: |
4.00" (102mm) (Flush Housings) |
|
Projects: |
2.25" (58mm) (Surface Mount Frames) |
Construction: |
Anodized extruded aluminum panel/faceplate.
|
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts, with solid aluminum pushbutton plungers (Black
Anodized). |
Speaker: |
2.50" (64mm) 45 ohm, Mylar Cone, model #SK024.
|
Housings: |
OH190 series, for flush style OF190 frames only.
|
|
Apt. Intercom Lobby Panels/Pedestals
Economy Style Bell-Buzzer Panel. Natural Anodized Aluminum finish
with plastic pushbuttons and no speaker. Used for bell buzzer type
systems only without intercom.
The AM600 series entrance panel is a one-piece
panel, for use with most bell-buzzer (non-intercom type) systems.
AM600 panels have no speaker and no speaker grille, and are used
for bell, buzzer, chime signaling only. All AM600 panels are 5.00"W
and 6.88"H. Alongside each plastic pushbutton is a name holder,
made of BLACK flame retardant polycarbonate plastic with a transparent
flame retardant poly-carbonate plastic cover. Names can easily
be inserted using paper tabs (supplied) or optional engraved plastic
nameplates (model #AMNP). AM600 panels are available in a 2-button
(AM602), 4-button (AM604), 6-button (AM606) and 8-button (AM608)
versions, and all four (4) are the same physical size. Flush mounting
requires a flush back box (model #IH101) or flush mounting ring
(model #IH102) or surface back box (model#OH700).
|
AM608 (shown)
|
FEATURES
Our Lowest Cost Bell-Buzzer Panels
Choose from 4 Versions
Self-Wiping Plastic Pushbuttons
Ultra Modern Styling
Flush or Surface Mounting
Panels are Narrow Width
Convenient Built-In Nameholders
SPECIFICATIONS
Dimensions: |
Height: |
6.88" (175mm) |
|
Width: |
5.00" (127mm) |
|
Depth: |
1.50" (38mm) (When Flush Mounted) |
|
Projects: |
0.50" (13mm) from mounting surface |
Construction: |
Solid Extruded Aluminum faceplate. |
Controls: |
Replaceable plastic push-button wih self-wiping
plated contacts. |
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts. |
Mounting: |
Mounts flush to wall using IH101 flush back
box or IH102 flush mounting ring. Surface mount to wall
using OH700 surface back box. |
|
Apt. Intercom Lobby Panels/Pedestals
Economy Style Panel. Natural Anodized Aluminum finish with plastic
pushbuttons and plastic speaker grille. Used with open-voice type
stations only.
The AM612 series entrance panel is a one-piece
panel, for use with most open-voice (loud-speaking type) apartment
intercom stations. AM612 panels are equipped with a weather-resistant
mylar cone speaker protected by a BLACK flame retardant poly-carbonate
plastic speaker grille. AM612 panels are available in two sizes.
The 11.25"H version is available from 2 to 8 push-buttons, and
the 19.00"H version is available from 10 to 16 pushbuttons. Both
sizes are 4.75"W. Alongside each plastic pushbutton is a name
holder, made of BLACK flame retardant poly-carbonate plastic with
a transparent flame retardant polycarbonate plastic cover. Names
can easily be inserted using paper tabs (supplied) or optional
engraved plastic nameplates (model#AMNP). AM612 panels are available
in a flush or surface configuration. Add the suffix 'S' to the
model number for the surface version. Flush models require a flush
back box (model #OH600 or#OH601). Surface models do not require
any back box or housing.
|
AM612/08 (shown)
|
FEATURES
Our Lowest Cost Entry Panels
Hands-Free Loudspeaking
Weather-resistant Mylar Speaker
Self-Wiping Plastic Pushbuttons
Ultra Modern Styling
Flush and Surface Models Available
Surface Models are Slim-Line type and do not require any backbox
SPECIFICATIONS
Dimensions: |
Height: |
11.25" (286mm) up to 8 buttons 19.00" (483mm) 10 to 16
buttons |
|
Width: |
4.75" (121mm) |
|
Depth: |
2.00" (51mm) (When Flush Mounted) |
|
Projects: |
2.00" (51mm) (Surface Mount Models) |
Construction: |
Anodized extruded aluminum panel/faceplate,
with BLACK flame retardant polycarbonate top and bottom
decorative end caps. |
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts. |
Speaker: |
2.50" (64mm) 45 ohm, Mylar Cone, model #SK024.
|
Housings: |
OH600 for 2-8 button Flush AM612 panel. OH601
for 10-16 button Flush AM612 panel. |
|
Apt. Intercom Lobby Panels/Pedestals
Economy Style Panel. Natural Anodized Aluminum finish with plastic
pushbuttons and plastic speaker grille. Used with the TA292 and
TA292A apt. handsets only.
The AM629 series entrance panel is a one-piece
panel, for use with our TA292A (handset type) apartment intercom
stations and PK292A amplifier. AM629 panels are equipped with
a weather-resistant mylar cone speaker protected by a BLACK flame
retardant polycarbonate plastic speaker grille. AM629 panels are
available in two sizes. The 11.25"H version is available from
2 to 8 push-buttons, and the 19.00"H version is available from
10 to 16 pushbuttons. Both sizes are 4.75"W.Alongside each plastic
pushbutton is a name holder, made of BLACK flame retardant poly-carbonate
plastic with a transparent flame retardant polycarbonate plastic
cover. Names can easily be inserted using paper tabs (supplied)
or optional engraved plastic nameplates (model#AMNP). AM629 panels
are available in a flush or surface configuration. Add the suffix
'S' to the model number for the surface version. Flush models
require a flush back box (model #OH600 or #OH601). Surface models
do not require any back box or housing.
|
AM629/08 (shown)
|
FEATURES
Our Lowest Cost Duplex Panels
Hands-Free Duplex Loudspeaking
Weather-resistant Mylar Speaker and Electret Microphone
Self-Wiping Plastic Pushbuttons with built-in diodes for 2-wire
handsets
Ultra Modern Styling
Flush and Surface Models Available
Surface Models are Slim-Line type and do not require any backbox
SPECIFICATIONS
Dimensions: |
Height: |
11.25" (286mm) up to 8 buttons 19.00" (483mm) 10 to 16
buttons |
|
Width: |
4.75" (121mm) |
|
Depth: |
2.00" (51mm) (When Flush Mounted) |
|
Projects: |
2.00" (51mm) (Surface Mount Models) |
Construction: |
Anodized extruded aluminum panel/faceplate,
with BLACK flame retardant polycarbonate top and bottom
decorative end caps. |
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts and built-in diodes. |
Speaker: |
2.50" (64mm) 45 ohm, Mylar Cone, model #SK024.
|
Microphone: |
Electret Condenser Type, model #MI004. |
Housings: |
OH600 for 2-8 button Flush AM629 panel. OH601
for 10-16 button Flush AM629 panel. |
|
Apt. Intercom Lobby Panels/Pedestals
Vandal-Resistant Panel. Natural Anodized Aluminum finish with metal
pushbuttons and metal speaker grille. Used with open-voice type
stations only.
The AM642 series entrance panel is a one-piece
panel, for use with most open-voice (loud-speaking type) apartment
intercom stations. AM642 panels are equipped with a weather-resistant
mylar cone speaker protected by a louvred aluminum speaker grille,
and solid aluminum pushbutton plungers, to resist vandalism. AM642
panels are available in two sizes. The 11.25"H version is available
from 2 to 8 push-buttons, and the 19.00"H version is available
from 10 to 16 pushbuttons. Both sizes are 4.75"W. Alongside each
plastic pushbutton is a name holder, made of BLACK flame retardant
polycarbonate plastic with a transparent flame retardant polycarbonate
plastic cover. Names can easily be inserted using paper tabs (supplied)
or optional engraved plastic nameplates (model#AMNP). AM642 panels
are available in a flush or surface configuration. Add the suffix
'S' to the model number for the surface version. Flush models
require a flush back box (model #OH600 or#OH601). Surface models
do not require any back box or housing.
|
AM642/08 (shown)
|
FEATURES
Vandal-Resistant with Metal Buttons and Metal Speaker Grille
Hands-Free Loudspeaking
Weather-resistant Mylar Speaker
Self-Wiping Pushbuttons
Ultra Modern Styling
Flush and Surface Models Available
Surface Models are Slim-Line type and do not require any backbox
SPECIFICATIONS
Dimensions: |
Height: |
11.25" (286mm) up to 8 buttons 19.00" (483mm) 10 to 16
buttons |
|
Width: |
4.75" (121mm) |
|
Depth: |
2.00" (51mm) (When Flush Mounted) |
|
Projects: |
2.00" (51mm) (Surface Mount Models) |
Construction: |
Anodized extruded aluminum panel/faceplate,
with BLACK flame retardant polycarbonate top and bottom
decorative end caps. |
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts, with solid aluminum pushbutton plungers (Black
Anodized). |
Speaker: |
2.50" (64mm) 45 ohm, Mylar Cone, model #SK024.
|
Housings: |
OH600 for 2-8 button Flush AM642 panel. OH601
for 10-16 button Flush AM642 panel. |
|
Apt. Intercom Lobby Panels/Pedestals
Vandal-Resistant Panel. Natural Anodized Aluminum finish with metal
pushbuttons and metal speaker grille. Used with the TA292 and TA292A
apt. handsets only.
The AM649 series entrance panel is a one-piece
panel, for use with our TA292A (handset type) apartment intercom
stations and PK292 amplifier. AM649 panels are equipped with a
weather-resistant mylar cone speaker protected by a louvred aluminum
speaker grille, and solid aluminum push button plungers, to resist
vandalism. AM649 panels are available in two sizes. The 11.25"H
version is available from 2 to 8 push buttons, and the 19.00"H
version is available from 10 to 16 push buttons. Both sizes are
4.75"W. Alongside each plastic push button is a name holder, made
of BLACK flame retardant poly-carbonate plastic with a transparent
flame retardant polycarbonate plastic cover. Names can easily
be inserted using paper tabs (supplied) or optional engraved plastic
nameplates (model#AMNP). AM649 panels are available in a flush
or surface configuration. Add the suffix 'S' to the model number
for the surface version. Flush models require a flush back box
(model #OH600 or#OH601). Surface models do not require any back
box or housing.
|
AM649/08 (shown)
|
FEATURES
Vandal-Resistant with Metal Buttons and Metal Speaker Grille
Hands-Free Duplex Loudspeaking
Weather-resistant Mylar Speaker and Electret Microphone
Self-Wiping Pushbuttons with built-in diodes for 2-wire handsets
Ultra Modern Styling
Flush and Surface Models Available
Surface Models are Slim-Line type and do not require any backbox
SPECIFICATIONS
Dimensions: |
Height: |
11.25" (286mm) up to 8 buttons 19.00" (483mm) 10 to 16
buttons |
|
Width: |
4.75" (121mm) |
|
Depth: |
2.00" (51mm) (When Flush Mounted) |
|
Projects: |
2.00" (51mm) (Surface Mount Models) |
Construction: |
Anodized extruded aluminum pane |
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts, with solid aluminum pushbutton plungers (Black
Anodized). |
Speaker: |
2.50" (64mm) 45 ohm, Mylar Cone, model #SK024.
|
Microphone: |
Electret Condenser Type, model #MI004. |
Housings: |
OH600 for 2-8 button Flush AM649 panel. OH601
for 10-16 button Flush AM649 panel. |
|
Apt. Intercom Lobby Panels/Pedestals
Vandal-Resistant Panel. Natural Anodized Aluminum finish with metal
pushbuttons and metal speaker grille. Alphabetical Directory is
protected by polycarbonate.
The CM491 series Tek-Guard™ entrance panel is
a directory style panel, for use with most open-voice (loudspeaking
type) apartment intercom stations, up to a 20 button capacity.
CM491 panels are equipped with a weather-resistant mylar cone
speaker protected by a louvred style aluminum speaker grille,
and solid aluminum pushbutton plungers with apartment markings
permanently engraved, to resist vandalism. A built-in mini alphabetical
directory module makes finding the tenant's pushbutton very easy.
CM491 series panels are available for 4,8,12,16 or 20 buttons.
For larger buildings, use our CM492 series modular style loudspeaking
panels. All CM491 modules have a 45-ohm speaker and 4-20 buttons
(in multiples of 4). All CM491 modules include a 20-name capacity
mini directory which installs into the frame, above the speaker/button
portion of the module. Directory strips can easily be inserted
into the directory module using optional engraved plastic directory
strips (model #TDS) and fill-in directory blanks (model #TDS-B).
CM491 modules must be installed into an OF291 (flush) or OF291S
(surface) panel frame. Flush CM491 panels require an OH191 flush
housing. Surface CM491 panels do not require a backbox.
|
CM491/012 (shown)
|
FEATURES
Vandal-Resistant with Metal Buttons and Metal Speaker Grille
Hands-Free Loudspeaking
Weather-resistant Mylar Speaker
Self-Wiping Pushbuttons
Permanently Engraved Metal Buttons
Built-in Mini Alphabetical Directory
Flush and Surface Models Available
Available with 4,8,12,16,20 Buttons
Compact Size - Only 6.25" Wide (O.D.)
SPECIFICATIONS
Dimensions: |
Height: |
19.00" (483mm) |
|
Width: |
6.25" (159mm) |
|
Depth: |
4.00" (102mm) (Flush OH191 Housing) |
|
Projects: |
2.25" (58mm) (OF291S Surface Frame) |
Construction: |
Anodized extruded aluminum panel/faceplate.
|
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts, with solid aluminum pushbutton plungers (Black
Anodized), with apartment designations permanently engraved.
|
Speaker: |
3.50" (89mm) 45 ohm, mylar cone, Model #SK004/PL194
(with mounting plate). |
Housings: |
Model OH191, for flush style OF291 frames only.
|
|
Apt. Intercom Lobby Panels/Pedestals
Vandal-Resistant Panel. Natural Anodized Aluminum finish with metal
pushbuttons and metal speaker grille. Alphabetical Directory is
protected by polycarbonate.
The CM492 series Tek-Guard™ entrance panel is
a modular style panel, for use with most open-voice (loudspeaking
type) apartment intercom stations. CM490 panels are equipped with
a weather-resistant mylar cone speaker protected by a louvred
style aluminum speaker grille, and solid aluminum (black anodized)
pushbutton plungers with apartment designations permanently engraved,
to resist vandalism. Alphabetical directory modules make finding
the tenant's push-button very easy, even in larger buildings.
CM492 series panels are available with a variety of module and
frame/housing configurations. Modules beginning with the model
CM490 are button modules only, with no speaker. CM490 modules
are available with 4 to 80 buttons (in multiples of 4). Modules
beginning with the model CM492 have a 45-ohm speaker and can accomodate
4-60 buttons (in multiples of 4). For modules requiring a speaker
only with no buttons, use model #AM492. Directory strips can easily
be inserted into the model #AM190D (60-name capacity) directory
modules using optional engraved plastic directory strips (model
#TDS) and fill-in directory blanks (model #TDS-B). CM490, CM492,
AM190D and AM492 modules must be installed into a flush or a surface
panel frame. Flush panels require an OF190 series frame, with
the OH190 series flush housing. Surface panels require an OF190S
series surface frame only, and do not require a back box.
|
CM492 Series
|
FEATURES
Vandal-Resistant with Metal Buttons and Metal Speaker Grille
Hands-Free Loudspeaking
Weather-resistant Mylar Speaker
Self-Wiping Pushbuttons
Permanently Engraved Metal Buttons
Alphabetical Directories
Flush and Surface Models Available
Modular Construction allows use in almost any size building
SPECIFICATIONS
Dimensions: |
Height: |
19.00" (483mm) |
|
Width: |
Depends upon number of modules wide. |
|
Depth: |
4.00" (102mm) (Flush Housings) |
|
Projects: |
2.25" (58mm) (Surface Mount Frames) |
Construction: |
Anodized extruded aluminum panel/faceplate.
|
Pushbuttons: |
Individually replaceable plastic type with self-wiping
contacts, with solid aluminum pushbutton plungers (Black
Anodized), with apartment designations permanently engraved.
|
Speaker: |
3.50" (89mm) 45 ohm, mylar cone, Model #SK004/PL194
(with mounting plate). |
Housings: |
OH190 series, for flush style OF190 frames only.
|
|
Apt. Intercom Lobby Panels/Pedestals
The TA105I and TA305I panel handset modules are designed to be installed
into the OF190 series panel frames, in place of the standard speaker
and microphones.
The Alpha Communications® TA105I and TA305I panel
modules are designed to be installed into the OF190 series panel
frames, in place of standard speaker and speaker/microphone components.
They can be resized to fit the OF200 or other special size frames,
upon request. The TA105I and TA305I modules are utilized in systems
where voice privacy is required at the calling panel, in place
of the standard open-voice (loudspeaking) type of speaker equipment.
The TA105I is used on 'simplex' type intercom systems using the
PK543 (or similar) intercom amplifier. TheTA305I is used on 'duplex'
type intercom systems using the PK205, PK292, NH200, NH201 or
NH209 (or similar) intercom amplifiers. When ordering, please
specify type of amplifier and type of apartment stations you will
be using. Both units feature a heavy duty ABS (Black) pay-phone
style handset mounted onto an AM190 aluminum panel module, with
an 'armor' cord and metal dead hook style handset cradle. The
internal speaker components installed into these handsets is determined
by the intercom amplifier with which the handset will be utilized.
TA105I and TA305I modules can be customized for specialty speaker/microphone
components and can be made with Push-To-Talk Buttons, standard
rubber coiled cords, live cradle switches, mounted on different
types and sizes of mounting plates and are available with optional
Grey, White or Beige colored handsets.
|
TA105I / TA305I Series
|
FEATURES
Heavy Duty ABS (Black) Pay-Phone Style Handset
Solid Metal 'Dead-Hook' Type Handset Cradle
Handset Built onto AM190 Aluminum Panel Module
26 Inch (661mm) 'Armor' Cord to Resist Vandalism
Exceptional Voice Fidelity
'Simplex' (TA105I) and 'Duplex' (TA305I) Models Available
Works with a Variety of Apartment Intercom and Video-Intercom
Entry Panels and Systems
Installs into Standard OF190 Series Panel Frames
SPECIFICATIONS
Dimensions: |
4.0"W (102mm) x 16.5"H (420mm)(AM190 module size--not
actual handset size) |
Options: |
Grey, White or Beige Colored Handsets, special speaker/microphone
components, custom sized backplate or panel module, 'live'
hook type cradle switch, 'Press-To-Talk' push-button, conventional
rubber coiled cord, and R2007I electronic call-down signal.
|
|
Apt. Intercom Lobby Panels/Pedestals
The TA301I, TA303I & TA309I handset modules are designed to
be installed into the OF190 series panel frames, in place of the
standard S.T.R. speaker/microphones.
The Alpha Communications® TA301I, TA303I and TA309I
panel modules are designed to be installed into the OF190 series
panel frames, in place of standard S.T.R. type speaker and microphone
components. They can be resized to fit the OF200 or other special
size frames, upon request. The TA301I, TA303I and TA309I modules
are utilized in systems where voice privacy is required at the
calling panel, in place of the standard open-voice (loudspeaking)
type of speaker equipment. The TA301I is used on 'duplex' type
intercom systems using the NH201TVA or NH201TT intercom amplifiers.
The TA303I is used on 'duplex' type intercom systems using the
NH200A or NH200TV intercom amplifiers. The TA309I is used on 'duplex'
type intercom systems using the NH209TT intercom amplifiers. When
ordering, please specify type of amplifier and type of apartment
stations you will be using. Both units feature a heavy duty ABS
(Black) pay-phone style handset mounted onto an AM190 aluminum
panel module, with an 'armor' cord and metal dead hook style handset
cradle. The internal speaker components installed into these handsets
is determined by the intercom amplifier with which the handset
will be utilized. All of the above handset modules can be customized
for specialty speaker/microphone components and can be made with
Push-To-Talk Buttons, standard rubber coiled cords, live cradle
switches, mounted on different types and sizes of mounting plates
and are available with optional Grey, White or Beige colored handsets.
|
TA301I / TA303I / TA309I
|
FEATURES
Heavy Duty ABS (Black) Pay-Phone Style Handset
Solid Metal 'Dead-Hook' Type Handset Cradle
Handset Built onto AM190 Aluminum Panel Module
26 Inch (661mm) 'Armor' Cord to Resist Vandalism
Exceptional Voice Fidelity
Works with a Variety of Apartment Intercom and Video-Intercom
Entry Panels and Systems
Installs into Standard OF190 Series Panel Frames
SPECIFICATIONS
Dimensions: |
4.0"W (102mm) x 16.5"H (420mm)(AM190 module size--not
actual handset size) |
Options: |
Grey, White or Beige Colored Handsets, special speaker/microphone
components, custom sized backplate or panel module, 'live'
hook type cradle switch, 'Press-To-Talk' push-button, conventional
rubber coiled cord, and R2007I electronic call-down signal. |
|
Apt. Intercom Lobby Panels/Pedestals
European Style Aluminum panels with illuminated buttons & plastic
speaker grille. Used mostly with the S.T.R. type handsets or with
the open-voice type stations.
The Alpha Communications®/S.T.R. TT/TTM/TBM series
entrance panels are rugged extruded aluminum entrance stations
equally suited for indoor or direct outdoor applications. Standard
finish is Dark Brown Anodized Aluminum. White, Natural Aluminum,
Black or other custom colors are also available at extra cost.
All TT and TTM/TBM (M=modular style) panels feature oversized,
gold-plated, self-wiping, illuminated call buttons, European styling,
mylar loudspeaker and electret condenser microphone for exceptional
voice fidelity. TT series panels are built in a 1-piece construction
in a flush or surface configuration (suffix 'S'), and can be custom-sized
for special applications. These attractive but rugged panels can
be made with any number of buttons in almost any configuration.
TTM (with speaker/microphone) and TBM (button only) series panels
are (flush mount type only) modular, snap-together panels which
can be ganged up to form virtually any size panel required, using
the model FBC flush box snap-on connectors. All panels are available
with information modules, built-in privacy handsets, annunciator
lights, built-in CCD camera with infrared illuminators, and a
host of other optional features. Flush panels are framed by thick
(15mm square) extruded aluminum channels. Surface panels are framed
by thick (38mm square) extruded aluminum channels. All panels
feature a 2mm thick solid aluminum faceplate.
|
TT / TB / TTM Series
|
FEATURES
Rugged Extruded Aluminum Construction
Easy Installation (Flush or Surface)
Can be used indoors or directly outdoors
Clear Voice Fidelity
Large, Illuminated Gold-Plated Call Buttons
Available in Any Number of Buttons
Mounts Flush or Surface (TT style only)
Available in a Wide Variety of Colors and Options
SPECIFICATIONS
Dimensions: |
Depends upon panel configuration. |
Receiver: |
50mm or 70mm round, 45 ohm or 16 ohm, depending upon panel
type/configuration. |
Microphone: |
Electret Condenser type. |
Pushbuttons: |
Individually replaceable SPST momentary type, with gold-plated
self-wiping contacts. |
|
Apt. Intercom Lobby Panels/Pedestals
Outdoor Free-Standing Pedestals in White or other optional colors.
Available with or without built-in CCD camera or a variety of optional
components. Weather-resistant.
The Alpha Communications®/S.T.R. TTS (and TTSV)
series free-standing pedestals are made of rugged extruded aluminum
and are suited for indoor or direct outdoor applications. Standard
finish is painted White. Dark Brown Anodized Aluminum. Natural
Aluminum, Black or other custom colors are also available at extra
cost. All TTS pedestals feature oversized, gold-plated, self-wiping,
illuminated call buttons, European styling, mylar loudspeaker
and electret condenser microphone for exceptional voice fidelity.Pedestal
access is available only by unlocking the built-in lock, with
the keys supplied. TTSV series pedestals are supplied with a built-in
CCD camera and infrared illuminators, for viewing visitors, even
in total darkness. These attractive but rugged pedestals can be
made with or without the built-in camera and up to 12 call buttons.
They come with a built-in mounting flange, which enables the pedestals
to be mounted directly to a concrete (or similar) mounting surface.
|
TTS / TTSV Pedestals
|
FEATURES
Rugged Extruded Aluminum Construction
Easy Installation (Bolts to Concrete Floor)
Can be used indoors or directly outdoors
Clear Voice Fidelity
Large, Illuminated Gold-Plated Call Buttons
Access secured by built-in Lock
Available with 0-12 Call Buttons
Available in a Wide Variety of Colors and Options
Optional CCD Camera with Infrared Illuminators
SPECIFICATIONS
Dimensions: |
Depends upon pedestal configuration. |
|
Receiver: |
70mm round mylar, 45 ohm or 16 ohm, depending upon pedestal
type/configuration. |
|
Microphone: |
Electret Condenser type. |
|
Pushbuttons: |
Individually replaceable SPST momentary type, with gold-plated
self-wiping contacts. Comes standard with bulbs for illumination. |
|
|
Apt. Intercom Lobby Panels/Pedestals
European Style Aluminum panels with illuminated buttons, plastic
speaker grille and built-in CCD camera. Used primarily with the
S.T.R. type video-intercom systems
The Alpha Communications®/S.T.R. TTV/TTMV series
video entrance panels are rugged extruded aluminum entrance stations
equally suited for indoor or direct outdoor applications. Standard
finish is Dark Brown Anodized Aluminum. White, Natural Aluminum,
Black or other custom colors are also available at extra cost.
All TTV and TTMV (M=modular style) panels feature oversized, gold-plated,
self-wiping, illuminated call buttons, European styling, mylar
loudspeaker, electret condenser microphone for exceptional voice
fidelity, and a built-in black and white CCD camera with infrared
illuminators. TTV series panels are built in a 1-piece construction
in a flush configuration only, and can be custom-sized for special
applications. These attractive but rugged panels can be made with
any number of buttons in almost any configuration. TTMV (with
speaker/microphone) and TBM (button only) series panels are (flush
mount typeonly) modular, snap-together panels which can be ganged
up to form virtually any size panel required, using the model
FBC flush box snap-on connectors. All panels are available with
information modules, built-in privacy handsets, annunciator lights,
and a host of other optional features. Flush panels are framed
by thick (15mm square) extruded aluminum channels. Surface panels
are framed by thick (38mm square) extruded aluminum channels.
All panels feature a 2mm thick solid aluminum faceplate.
|
TTV / TTMV Series
|
FEATURES
Rugged Extruded Aluminum Construction
Built-in High Quality CCD Camera with Infrared Illuminators
Easy Installation (Flush)
Can be used indoors or directly outdoors
Clear Voice Fidelity
Large, Illuminated Gold-Plated Call Buttons
Available in Any Number of Buttons
Available in a Wide Variety of Colors and Options
SPECIFICATIONS
Dimensions: |
Depends upon panel configuration. |
Receiver: |
50mm or 70mm round, 45 ohm or 16 ohm, depending upon panel
type/configuration. |
Microphone: |
Electret Condenser type. |
Pushbuttons: |
Individually replaceable SPST momentary type, with gold-plated
self-wiping contacts. |
|
Apt. Intercom Lobby Panels/Pedestals
Vandal-Resistant Panel. Brushed Stainless Steel finish with solid
metal pushbuttons and metal speaker grille. Can be made in flush
or surface type and in custom sizes.
The Alpha Communications VI402 V.I.P™ series Stainless
Steel (Vandal-Resistant) lobby panels are rugged, good-looking
panels for indoor or outdoor use. Made of heavy 16 gauge high-carbon
stainless steel, the VI402 series is made to take abuse. VI402
panels are all custom-made to your exact size and layout specifications
and are available in flush or surface mount styles. Flush VI402
panels can be made completely flat, with a slight bevel on the
edges or a 1/2" returned edge (please specify when ordering).
Other options for the VI402 series include postal release switch
(PO402I) built-in, built-in or separate matching stainless steel
alphabetical directories, built-in CCD camera (CCDCAM-I), and
a host of optional speaker/microphone and handset options. All
VI402 panels feature solid metal push-buttons, engraved apt. markings
(right onto the face of the panel), and building name/number engraving
at the top of the panel (where space allows). The use of Star
Head screws makes it nearly impossible to tamper with the panel
or directory without the use of the special screwdriver tool.
|
Typical VI402 V.I.P. Panel
|
FEATURES
Heavy 16 Gauge High-Carbon Stainless Steel Faceplate
Solid Extruded Aluminum Push-button Plungers with Permanent
Engravings
Names are Protected by a Thick, Clear Polycarbonate Window
Rugged and Good-Looking, Vandal-resistant
Wide Variety of Speaker/Microphone Components Available
Works with a Variety of Apartment Intercom and Video-Intercom
Systems
Built-in Alphabetical Directories
Panels can be made Flush or Surface Mount
Tamper-Resistant 'Star' Head Screws Used
SPECIFICATIONS
Dimensions: |
Depends upon individual panel configuration. |
Construction: |
Heavy 16 Gauge High-Carbon Stainless Steel Faceplate with
Polycarbonate Directory Window. |
Tool Required: |
'Star' Head screwdriver tip required for panel installation/removal
and directory name insertion and maintenance, included with
each VI402 V.I.P.™ panel ordered. |
|
Apt. Intercom Lobby Panels/Pedestals
Solid Polished Brass finish with solid metal pushbuttons and metal
speaker grille. Can be made in flush or surface type and in custom
sizes. Many speaker types avail.
The Alpha Communications VI404 V.I.P™ series Polished
Brass lobby panels are great-looking upscale panels, for indoor
use. Made of extra heavy solid brass, with a highly polished finish,
the VI404 series is made compliment any decor. VI404 panels are
all custom-made to your exact size and layout specifications and
are available in flush or surface mount styles. Flush VI404 panels
can be made completely flat, with a slight bevel on the edges
or a 1/2" return ededge (please specify when ordering). Other
options for the VI404 series include postal release switch (PO402I)
built-in, built-in or separate matching polished brass alphabetical
directories, built-in CCD camera (CCDCAM-I), and a host of optional
speaker/microphone and handset options. All VI404 panels feature
solid metal push-buttons, engraved apt. markings (right onto the
face of the panel), and building name/number engraving at the
top of the panel (where space allows). The use of Star Head screws
makes it nearly impossible to tamper with the panel or directory
without the use of the special screwdriver tool.
|
VI404 Brass V.I.P. Series
|
FEATURES
Heavy .065 Gauge Solid Polished Brass Faceplate
Solid Extruded Aluminum Push-button Plungers with Permanent
Engravings
Names are Protected by a Thick, Clear Polycarbonate Window
Rugged and Good-Looking, Vandal-resistant
Wide Variety of Speaker/Microphone Components Available
Works with a Variety of Apartment Intercom and Video-Intercom
Systems
Built-in Alphabetical Directories
Panels can be made Flush or Surface Mount
Tamper-Resistant Star Head Screws Used
SPECIFICATIONS
Dimensions: |
Depends upon individual panel configuration. |
Construction: |
Heavy .065 Gauge Solid Polished Brass Faceplate with Polycarbonate
Directory Window. |
Tool Required: |
Star Head screwdriver tip required for panel installation/removal
and directory name insertion and maintenance, included with
each VI404 V.I.P.™ panel ordered. |
|
|