Indoor and Outdoor Remote Stations

Tough 16 gauge Stainless Steel cover plates is designed to mount over our model OR202 plastic remote station, to resist vandalism.

The Alpha Communications® CP202SS stainless steel cover plate is designed specifically to work with our popular OR202 remote station (from our SM202K Duo Com™ intercom kit). Made from 16 gauge high-carbon brush finish stainless steel, with solid metal push-button, these coverplates are built to last and to minimize vandalism and abuse.

The CP202SS installs right over the existing OR202 remote station and is secured to the wall with vandal-resistant 'Star type' head screws. (Requires model# '8TORX' screwdriver tool/tip*).

*NOTE: The CP202SS is not provided with a 'Star type' head screwdriver tip. This can be ordered separately, using our model# '8TORX'.


CP202SS Cover Plate For OR202

CP202SS
FEATURES
  • Simple Installation, mounts right on surface of wall
  • Made of Rugged 16 gauge High-Carbon Stainless Steel
  • Tamper and Vandal-Resistant
  • Solid Metal Call Button Assembly
  • Mounts right over our model OR202 Remote Station
  • Metal Mesh Speaker Grille
  • Installs with 'Star type' tamper-resistant mounting screws (provided)*

    SPECIFICATIONS/DIMENSIONS
    Dimensions: 3.63"W (93mm) x 6.13"H (156mm) x 0.50"D (13mm) from surface of wall.
    Construction: Solid 16 gauge high-carbon brush finish Stainless Steel faceplate.
    Push Button: Solid Metal push-button assembly.
    Mounting: Surface mounts (over existing OR202 remote).


  • Indoor and Outdoor Remote Stations

    Indoor Remote Station without any Call Button. White Plastic Finish. Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications®/Tektone IR100B series indoor remotes are designed to surface or flush mount, and to provide two-way communication from a variety of types of intercom systems.

    The IR100B remotes are 2-wire type only and are normally used with system such as the IR704B/PK724, 'EK' series music-intercoms, IR204C/PK543 and the SM103B/BD Tek-Trio masters.

    When used with systems such as the SM201B, SM203B, and SM205/SM210 series, they require the addition of a model EC105 non-polarized capacitor.


    IR100B Indoor Remote Station

    IR100B
    FEATURES
  • Made of White ABS Plastic
  • Easy Installation
  • Mounts Flush or Surface (with appropriate backbox)
  • Clear Voice Fidelity using high quality 3.50" voice speaker
  • Hands-free Reply
  • Installs with Scrulox type tamper-resistant mounting screws (provided)

    SPECIFICATIONS
    Dimensions: Height: 7.00" (178mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: High-Impact ABS plastic faceplate (White).
    Speaker/Mic: 3.50" (89mm) paper cone speaker with voice response, Model SK013.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using IH700W surface back box (painted White). Can be desk mounted using IH400A White plastic Desk Cabinet.


  • Indoor and Outdoor Remote Stations

    Indoor Remote Station with Momentary Plastic Call Button. White Plastic Finish Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications®/Tektone IR501B and IR510B series indoor remotes are designed to surface or flush mount, and to provide two-way communication from a variety of types of intercom systems.

    The IR501B remotes are 3-wire or 4-wire type and are normally used with systems such as the IR704B/PK724, 'EK' series music-intercoms, IR204C/PK543 and the SM103B/BD Tek-Trio masters. The IR501B remotes can be converted into the IR510B 2-wire type, by the addition of a model EC105 non-polarized capacitor.

    The IR510B remotes are 2-wire type, and are normally used with systems such as the SM201B, SM203B, SM205/SM210 series, and SM400 series.


    IR501B / IR510B Indoor Remote

    IR501B / IR510B
    FEATURES
  • Simple push button call operation
  • Made of White ABS Plastic with Plastic Call Button
  • Easy Installation
  • Mounts Flush or Surface (with appropriate backbox)
  • Clear Voice Fidelity using high quality 3.50" voice speaker
  • Hands-free Reply
  • Installs with Scrulox type tamper-resistant mounting screws (provided)

    SPECIFICATIONS
    Dimensions: Height: 7.00" (178mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: High-Impact ABS plastic faceplate (White).
    Speaker/Mic: 3.50" (89mm) paper cone speaker with voice response, Model SK013.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using IH700W surface back box (painted White). Can be desk mounted using IH400A White plastic Desk Cabinet.


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station without any Call Button. Anodized Aluminum Finish. Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications®/Tektone OR101 series outdoor remotes are designed to surface or flush mount, and to provide two-way communication from a variety of types of intercom systems.

    The OR101 remotes are 2-wire type and are normally used with systems such as the Tek-Com IR704B/PK724, 'EK' series music-intercoms, IR204C/PK543 and the SM103BD Tek-Trio masters.

    When used with systems such as the SM201B, SM203B, SM205/SM210 series, or the SM400 series, the OR101 remotes must be modified with the addition of a model EC105 non-polarized capacitor.


    OR101 Outdoor Remote Station

    OR101
    FEATURES
  • Made of Rugged Extruded Aluminum
  • Natural Anodized Aluminum Finish
  • Easy Installation - Requires only 2-Wires
  • Mounts Flush or Surface (with appropriate backbox)
  • Clear Voice Fidelity using high quality 2.50" voice speaker
  • Hands-free Reply
  • Installs with Scrulox type tamper-resistant mounting screws (provided)

    SPECIFICATIONS
    Dimensions: Height: 6.88" (175mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: Solid Extruded Aluminum faceplate.
    Speaker/Mic: 2.50" (64mm) mylar speaker with voice frequency response, Model SK024.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using OH700 surface back box (Steel painted Black).


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with Momentary Call button. Black Plastic finish. Can Surface mount right on wall or over single gang electrical flush back box.

    The Alpha Communications® OR202 outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting. The OR202 is finished in Black plastic, to blend with almost any decor, and to minimize dirt and grime. They are designed to work with our SM202 Duo-Com intercom system. A maximum on two (2) OR202 remotes can be connected to a single SM202 master station.


    OR202 Outdoor Remote Station

    OR202
    FEATURES
  • Requires only 2-Wires for Intercom and Call
  • Black Plastic finish minimizes dirt and grime
  • Can be Fully Surface Mounted without any Back Box
  • Modern Styling
  • Built-in Momentary Call Button
  • Provided with Black Mounting Screws

    SPECIFICATIONS/DIMENSIONS
    Height: 5.25" (134mm)
    Width: 4.00" (102mm)
    Depth: 1.25" (32mm) from surface of wall


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with 2 Momentary Plastic Call Buttons. Anod. Alum. Finish Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications®/Tektone OR501/2 series outdoor remotes are designed to surface or flush mount, and to provide two-way communication from a variety of types of intercom systems. They are a low-cost alternative to conventional 2 button lobby entry panels.

    The OR501/2 remotes are normally used with systems such as the IR204C/PK543 type apartment intercom systems. The 2 push-buttons are plain plastic buttons, and are not numbered or lettered, and there is no place to hold the tenant's names.


    OR501/2 Outdoor Remote Station

    OR501/2
    FEATURES
  • Low-Cost Alternative to Lobby Entry Panels
  • Simple push button call operation
  • Made of Rugged Extruded Aluminum with (2) Plastic Call Buttons
  • Natural Anodized Aluminum Finish
  • Easy Installation
  • Mounts Flush or Surface (with appropriate backbox)
  • Clear Voice Fidelity using high quality 2.50" voice speaker
  • Hands-free Reply
  • Installs with Scrulox type tamper-resistant mounting screws (provided)

    SPECIFICATIONS
    Dimensions: Height: 6.88" (175mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: Solid Extruded Aluminum faceplate.
    Controls: (2) Replaceable plastic push-buttons wih self-wiping plated contacts.
    Speaker/Mic: 2.50" (64mm) mylar speaker with voice frequency response, Model SK024.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using OH700 surface back box (Steel painted Black).


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with Momentary Plastic Call Button. Anod. Aluminum Finish Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications®/Tektone OR501B and OR510 series outdoor remotes are designed to surface or flush mount, and to provide two-way communication from a variety of types of intercom systems.

    The OR501B remotes are 3-wire or 4-wire type and are normally used with systems such as the IR704B/PK724, 'EK' series music-intercoms, IR204C/PK543 and the SM103B/BD Tek-Trio masters. They can be converted into the OR510 2-wire type by the addition of a model EC105 non-polarized capacitor.

    The OR510 remotes are 2-wire type and are normally used with systems such as the SM201B, SM203B, SM205/SM210 series, or the SM400 series.


    OR501B / OR510 Outdoor Remote

    OR501B / OR510
    FEATURES
  • Simple push button call operation
  • Made of Rugged Extruded Aluminum with Plastic Call Button
  • Natural Anodized Aluminum Finish
  • Easy Installation
  • Mounts Flush or Surface (with appropriate backbox)
  • Clear Voice Fidelity using high quality 2.50" voice speaker
  • Hands-free Reply
  • Installs with Scrulox type tamper-resistant mounting screws (provided)

    SPECIFICATIONS
    Dimensions: Height: 6.88" (175mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: Solid Extruded Aluminum faceplate.
    Controls: Replaceable plastic push-button wih self-wiping plated contacts.
    Speaker/Mic: 2.50" (64mm) mylar speaker with voice frequency response, Model SK024.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using OH700 surface back box (Steel painted Black).


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with Momentary Metal Call button. Stainless Steel Finish. Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications® OR502SS outdoor remote intercom stations are designed specifically to minimize vandalism and abuse. Made from 16 gauge high-carbon brush finish stainless steel, with solid metal push-button, these stations are built to last. A high sensitivity 2.75" (70mm) mylar plastic cone speaker assures crisp, clear voice communication, and resists mold and mildew caused by dampness on paper cone speakers.

    The OR502SS is designed to work with many types of intercom systems, and mounts over our standard IH101 (flush) or OH700 (surface) back box.

    Pigtail wiring makes these stations easy to wire and resists water corrosion found on P.C. board type stations. When used with the SM201B, SM202, SM203B, SM205 (series), SM210 (series) or SM401, SM404, SM406 or SM411 master station(s), a model EC105 non-polarized capacitor must be installed into the OR502SS remote station. Stations are also available in custom sizes and wiring configurations.


    OR502SS Outdoor Remote Station

    OR502SS
    FEATURES
  • Simple push button call operation
  • Made of Rugged Stainless Steel with Metal Push-Button
  • Tamper and Vandal-Resistant
  • Easy Installation
  • Mounts on our standard flush or surface back box
  • Clear Voice Fidelity using high quality 2.75" voice speaker
  • Pigtail wiring minimizes water corrosion
  • Simple to Operate and Reliable
  • Installs with Scrulox type tamper-resistant mounting screws (provided)
  • Hands-free reply

    SPECIFICATIONS
    Dimensions: Height: 7.00" (178mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: Solid 16 gauge high-carbon brush finish stainless steel faceplate (bevelled).
    Controls: Replaceable solid metal push-button wih self-wiping plated contacts.
    Speaker/Mic: 2.75" (70mm) 45 ohms, mylar speaker with voice frequency response.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using OH700 surface back box (Steel painted Black).


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station without any Call Button. Woodgrain Plastic finish. Can Surface mount right on wall or over single gang electrical flush back box.

    The Alpha Communications®/Tektone OR601 series outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting. The model OR601 is finished in a Walnut woodgrain and black finish. The model OR601W is finished in an All-White plastic finish. The OR601 remotes are 2-wire type and are normally used with systems such as the PK543, IR704B/PK724, 'EK' series music-intercoms, and the SM103B/BD Tek-Trio masters. They can be used on the SM201B, SM203B, SM205 series, SM210 series, or SM400 series masters, with the addition of a model EC105 non-polarized capacitor.


    OR601 Outdoor Remote Station

    OR601 (shown) / OR601W
    FEATURES
  • Requires only 2-Wires for Intercom
  • Can be Fully Surface Mounted without any Back Box
  • Modern Styling
  • Provided with Tamper-resistant Scrulox Mounting Screws
  • Choose from Woodgrain models or White (suffix W) models
  • Hands-Free Reply

    SPECIFICATIONS/DIMENSIONS
    Dimensions: Height: 5.25" (134mm)
      Width: 4.00" (102mm)
      Projects: 1.25" (32mm) from surface of wall


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with Momentary Call button. Woodgrain Plastic finish. Can Surface mount right on wall or over single gang electrical flush back box.

    The Alpha Communications®/Tektone OR603 and OR610 series outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting. Both models are finished in a Walnut woodgrain and black finish. They are also available in an all-white version by ordering models OR603W or OR610W.

    The OR603 (and OR603W) remotes are 3-wire type and are normally used with system such as the IR704B/PK724, 'EK' series music-intercoms, and the SM103B / Sm103BD Tek-Trio masters. They can be converted into the OR610 (and OR610W) 2-wire type by the addition of a model EC105 non-polarized capacitor.

    The OR610 (and OR610W) remotes are 2-wire type and are normally used with system such as the SM201B, SM203B, SM205/SM210 series, and SM400 series.


    OR603 / OR610 Outdoor Remote

    OR603 / OR610
    FEATURES
  • Requires only 2-Wires for Intercom and Call (OR610 series)
  • Requires only 3-Wires for Intercom and Call (OR603 series)
  • Can be Fully Surface Mounted without any Back Box
  • Modern Styling
  • Built-in Momentary Call Button
  • Provided with Tamper-resistant Scrulox Mounting Screws
  • Choose from Woodgrain models or White (suffix W) models
  • Hands-Free Reply

    SPECIFICATIONS/DIMENSIONS
    Dimensions: Height: 5.25" (134mm)
      Width: 4.00" (102mm)
      Projects: 1.25" (32mm) from surface of wall


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with Illuminated Call button. Woodgrain Plastic finish. Can Surface mount right on wall or over single gang electrical flush back box.

    The Alpha Communications®/Tektone OR604A and OR604AW series outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting.

    The OR604A is finished in a Walnut woodgrain and black finish and the OR604AW is an all-White version. Both models feature a momentary, illuminated call button.

    The OR604A (and OR604AW) remotes are 4-wire type and are normally used only with the IR704B, IR704BD, PK724 and the 'EK' series music-intercoms.


    OR604A Outdoor Remote Station

    OR604AW (shown)
    FEATURES
  • Built-in Momentary Illuminated Call Button
  • RCan be Fully Surface Mounted without any Back Box
  • Modern Styling
  • Provided with Tamper-resistant Scrulox Mounting Screws
  • Choose from Woodgrain models or White (suffix W) models
  • Hands-Free Reply

    SPECIFICATIONS/DIMENSIONS
    Dimensions: Height: 5.25" (134mm)
      Width: 4.00" (102mm)
      Projects: 1.25" (32mm) from surface of wall


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with Illuminated Call button. White or Woodgrain finish. Can surface mount right on wall or over single gang electrical flush back box.

    The Alpha Communications®/Tektone OR642 and OR642W outdoor remotes are designed to fully surface mount on the finished wall surface. They can also be mounted over a single gang flush electrical 'gem' box. No back box is required for surface wall mounting. The OR642 is finished in a Walnut woodgrain and black finish and the OR642W is finished in an all-White plastic.

    The OR642 (and OR642W) remotes are 2-wire type and are normally used with the SM400 series intercom system(s) only. Only one (1) of the remotes on the SM400 system can be a model OR642 --OR-- OR642W with the illuminated call button.


    OR642 / OR642W Outdoor Remote

    OR642 / OR642W (shown)
    FEATURES
  • Requires only 2-Wires for Intercom and Call
  • Can be Fully Surface Mounted without any Back Box
  • Modern Styling
  • Built-in Momentary Illuminated Call Button
  • Provided with Tamper-resistant Scrulox Mounting Screws
  • Choose from Woodgrain model or White (suffix W) model
  • Hands-Free Reply

    SPECIFICATIONS/DIMENSIONS
    Dimensions: Height: 5.25" (134mm)
      Width: 4.00" (102mm)
      Projects: 1.25" (32mm) from surface of wall


  • Indoor and Outdoor Remote Stations

    European Style Aluminum panels with illuminated buttons & plastic speaker grille. Used mostly with the S.T.R. type handsets or with the open-voice type stations.

    The Alpha Communications®/S.T.R. TT series remote stations are rugged extruded aluminum entrance stations equally suited for indoor or direct outdoor applications. Standard finish is Dark Brown Anodized Aluminum. White, Natural Aluminum, Black or other custom colors are also available at extra cost.

    All TT remotes feature oversized, gold-plated, self-wiping, illuminated call buttons, European styling, mylar loudspeaker and electret condenser microphone for exceptional voice fidelity. The button design and gold-plating make them our most weather-resistant door remote stations.

    TT series panels are built in a 1-piece construction in a flush or surface configuration (suffix 'S'), and can be custom-sized for special applications. These attractive but rugged remotes can be made with any number of buttons in almost any configuration.

    All TT remotes are also available with built-in CCD camera with infrared illuminators (TTV series).

    Flush panels are framed by thick (15mm square) extruded aluminum channels. Surface panels are framed by thick (38mm square) extruded aluminum channels. All panels feature a 2mm thick solid aluminum faceplate.


    TT Series Indoor or Outdoor Remotes

    TT3B (shown)
    FEATURES
  • Rugged Extruded Aluminum Construction
  • Easy Installation (Flush or Surface)
  • Can be used indoors or directly outdoors
  • Clear Voice Fidelity
  • Large, Illuminated Gold-Plated Call Buttons
  • Available in Any Number of Buttons
  • Mounts Flush or Surface
  • Available in a Wide Variety of Colors and Options

    SPECIFICATIONS
    Dimensions: Depends upon panel configuration.
    Receiver: 50mm or 70mm round, 45 ohm or 16 ohm, depending upon panel type/configuration.
    Microphone: Electret Condenser type.
    Pushbuttons: Individually replaceable SPST momentary type, with gold-plated self-wiping contacts.


  • Indoor and Outdoor Remote Stations

    Outdoor Remote Station with dual contact momentary Plastic Button. Anod. Alum. Finish. Can be Flush or Surface Mounted with the appropriate back box/housing.

    The Alpha Communications® XOR501B2 outdoor remote intercom stations are designed specifically for applications requiring a call button with two (2) sets of independent contacts. Made from solid extruded aluminum, in a natural anodized finish, these stations are built to last. A high sensitivity 2.50" (64mm) mylar plastic cone speaker assures crisp, clear voice communication, and resists mold and mildew caused by dampness on paper cone speakers. The built-in plastic push-button provides two (2) independent contacts when depressed. This allows the remote station to activate two (2) separate signaling devices simultaneously. A high-impact ABS speaker grille protects the speaker.

    The XOR501B2 is designed to work with many types of intercom systems, and mounts over our standard IH101 (flush) or OH700 (surface) back box.

    When used with the SM201B, SM202, SM203B, SM205 (series), SM210 (series) or SM400 (series) master station(s), a model EC105 non-polarized capacitor must be installed into the XOR501B2 remote stations.


    XOR501B2 Outdoor Remote Station

    XOR501B2
    FEATURES
  • Simple push button call operation
  • Made of Rugged Extruded (Anodized) Aluminum
  • Built-in CALL Button with Two (2) Sets of Contacts
  • Mounts on our standard flush or surface back box
  • Clear Voice Fidelity using high quality 2.50" voice speaker
  • Simple to Install and Easy to Operate
  • Installs with Scrulox type tamper-resistant mounting screws (provided)
  • Hands-free reply

    SPECIFICATIONS
    Dimensions: Height: 6.88" (175mm)
      Width: 5.00" (127mm)
      Depth: 1.50" (38mm) (When Flush Mounted)
      Projects: 0.50" (13mm) from mounting surface
    Construction: Solid Extruded Aluminum faceplate.
    Controls: Replaceable plastic push-button wih self-wiping plated contacts and two (2) independant sets of contacts.
    Speaker/Mic: 2.50" (64mm) mylar speaker with voice frequency response, Model SK024.
    Mounting: Mounts flush to wall using IH101 flush back box or IH102 flush mounting ring. Can be surface mounted using OH700 surface back box (Steel painted Black).

  • WE SHIP NATIONWIDE
    CCTV and Security Systems on GSA Contract
    We Accept Purchase Orders
    In addition to all the major credit cards we accept purchase orders from Fortune 1000 corporations, educational institutions, and government agencies.
    All purchase order terms are Net 30 days. Please fax your purchase order to (718) 259-3294
    SEARCH BY BRAND| SHOPPING LIST | CONTACT US| ABOUT US| HOME

    © Privacy Policy