RECEIVERS
Control PTZ units from other manufacturers
GE Interlogix receivers make it easy to control PTZ units from other
manufacturers. That means you can integrate your existing equipment
into your system as well as simplify common security system functions.
Connect a PTZ receiver to a KTD-400, KTD-404 or KTD-405 keypad, and
you can control just about any PTZ unit. Auxiliary receivers let you
use software to customize keypad operations. Simply program specific
functions to individual keys; then you can perform those functions
with a single key stroke.
PTZ Receivers
PTZ receivers are available in three models. The weatherproof, heavy-duty
KTD-125 can be configured for 115 or 24 VAC motors as well as for
remote programming of up to 10 preset camera positions. The economical
KTD-127 drives light-duty 24 VAC motors and is available in a weatherproof
configuration. The extra-small KTD-128P receiver fits inside most
domed camera housings, drives light-duty 24 VAC motors and can be
programmed with up to 10 presets.
PTZ Receivers Description
PTZ receivers are available in three models. The
weatherproof, heavy-duty KTD-125 can be configured
for 115 or 24 VAC motors as well as for remote programming
of up to 10 preset camera positions. The economical
KTD-127 drives light-duty 24 VAC motors and is available
in a weatherproof configuration. The extra-small KTD-128P
receiver fits inside most domed camera housings, drives
light-duty 24 VAC motors and can be programmed with
up to 10 presets
|
|
Auxiliary Receivers
Description
GE Interlogix offers a number of auxiliary
receivers depending on your system requirements.
The KTD-131 features eight 7.5-amp, dry-contact
relays in a compact, weatherproof housing.
The KTD-137 can accept up to seven KTD-137B
relay cards (sold separately), giving you
28 dry-contact relays. The KTD-138 gives
you four DPDT 1-amp dry contacts and a transformer,
with each relay connected to a common output.
|
|
|
|
Face Badge Reader Description
The Face Badge Reader from GE Interlogix gives you
the security of live identification at entry and exit
points. This easy-to-install compact unit combines
the latest technology with an attractive appearance
to provide you an appealing and reliable access control
tool. Its brushed stainless steel housing can be flush-mounted
or surface-mounted.
The face/badge reader contains a built-in screen
inserter for simultaneous display of face and identification
badge. You can remotely adjust the motorized mirror
to accommodate a person's height. A five-position
video switcher provides the ability to call up face
and face-and-badge views as well as views from additional
overhead cameras and entry-door or exit-door cameras
in mantrap applications. Other features include two-way
audio, door, gate and turnstile control and video
display of door status. Cameras and lenses are not
included.
|
|
|