SD-997B Electric
Deadbolt from SECO-LARM ® NEW!
|
|
Adds concealed deadbolt security to most wood or hollow metal
doors, with the added convenience of electrical operation.
SD-997B - Fail Safe:*
Adds concealed deadbolt security to most wood or hollow metal
doors, with the added convenience of electrical operation.
Fail-safe operation (unlocks if power is lost).
Door open/close monitor (NO/C/NC).
Adjustable door lock delay timer (0, 2.5, 5, or 9 seconds).
Control wire allows release without cutting unit’s power.
Magnetic switch determines door position for positive locking.
Solenoid shuts off if door not closed properly to prevent burning
out..
Use with an optional digital keypad for high security without
a key.
Easily connects to SECO-LARM's SK-983A Electronic Keypad.
Suitable for office-type applications.
Shallow design for use with most metal door jambs.
No limiting installation orientation.
Powered by a solenoid.
Stainless steel for strength and long life — Operatiing lifetime:
1,000,000 operations.
Plastic material — Tefulon Polymonochlorotrifluoethylene.
Power — 12VDC, 880mA on activation, 330mA on standby.
Over-current protection — 1.5A.
|
* With control wire which allows for releasing without cutting
unit’s power.
Stainless steel bolt, 5/8" diameter, 5/8" throw.
Lock body (faceplate) dimensions - 77/8"
x 15/16" (200 x 32mm).
Lock body (cavity) dimensions - 53/4"
x 11/8" x 11/2"
(145 x 28 x 38mm).
Strike plate dimensions - 39/16"
x 1" x 11/8" (90 x 25 x 3mm).
Plug — Special coniccavity stainless steel (thickness 1.5mm~1.8mm).
|
SD-997B-24 - Now available by special
order only.
Power — 24VDC, 600mA on activation, 240mA on standby.
|
SD-997SMB
Surface Mount Bracket Kit - NEW!
This new electric deadbolt mounting bracket kit allows you
to mount SECO-LARM’s SD-997B deadbolt on the door jamb instead of
in the door and door frame for those situations where in-door mounting
is not possible due to space or door material considerations.
The SD-997SMB kit includes two brackets, one for the deadbolt itself,
and the other for the deadbolt’s strike plate. One side of the brackets
can be quickly removed for easy screwing into the door or the door
jamb. Installation on nearly any type of door is fast and easy.
The brackets have an attractive brushed aluminum finish, and were
designed to withstand years of continuous locking and unlocking. |
|
|